Chimney Sweeping in Running Springs, CA

Chimney Sweeping for Running Springs Homeowners

Running Springs sits at about 6,100 feet where Highway 18 meets Highway 330, and it is a genuinely year-round mountain town rather than a weekend one. The proportion of permanent residents is high, the burning season is longer than it is further down the rim, and a substantial number of households here use a wood stove or an insert as real primary or backup heat rather than as an occasional evening fire. That changes the work considerably. A stove that runs daily from October through April puts far more through the flue than an open fireplace lit twenty times a winter, and the flues serving inserts are frequently the original fireplace flue with an appliance dropped into it and no properly sized liner run to the top. That combination — heavy continuous use and an oversized, uninsulated flue — produces more glazed creosote and more genuine chimney fires than anything else we deal with on the mountain.

Wood stove and fireplace insert installations dominate the work here, and the most common serious finding is an insert vented into an unlined original fireplace flue. Manufacturers require a correctly sized liner run continuously to the cap, and a great many local installations do not have one — the appliance was simply set into the opening. Daily-burn households also need a different service interval to the rest of the rim: once a season is a starting point, and heavy burners are often better served by a mid-season check. Elevation means the season starts earlier and finishes later here than in Crestline or Blue Jay.

Creosote is what is left when wood gas leaves the fire unburned and condenses on a cooler flue wall. It starts as a light soot you can brush off, dries into a flaky crust, and — if the flue runs cold, the wood is wet, or the fires are damped down overnight — hardens into a glazed tar that behaves like a fuel lining the inside of the chimney. Glazed creosote ignites around 450°F, and a flue fire burns well past 2,000°F, which is far more than clay tile liners are built to survive. Most tile cracks from a chimney fire, and most homeowners never knew they had one. Sweeping removes the fuel before it can do that, and the inspection that comes with it is what tells you whether last season already did damage.